Analysis · 3 min read
RED III industrial hydrogen targets: what 42% means
The EU directive sets a Member State obligation using a defined industrial hydrogen calculation. Its headline share does not reveal a factory's purchases or a producer's contracted sales.
Start with the obligation and its calculation
Directive (EU) 2023/2413, dated 18 October 2023, inserted Article 22a into the Renewable Energy Directive. It requires Member States to ensure that the contribution of renewable fuels of non-biological origin (RFNBOs) reaches at least 42% of the specified hydrogen used in industry by 2030, and 60% by 2035.
The calculation uses energy content. The denominator covers hydrogen for final energy and non-energy purposes, subject to stated exclusions. The numerator covers RFNBOs consumed in industry for those purposes, with its own exclusion. These are defined quantities, not a percentage of every hydrogen purchase or every industrial site's output.
For a supplier, the first question is therefore how the relevant Member State implements the obligation and which customers fall within that implementation. Article 22a names Member States as the obligation holders. A national target alone does not identify an individual buyer's price, purchase volume or contract start.
Sources
- [1] European Parliament and Council of the European Union: Directive (EU) 2023/2413 of 18 October 2023
As of: 31 Oct 2023
Last confirmed: 16 Nov 2026
Preserve the exclusions in the denominator
Article 22a excludes three categories from the hydrogen denominator. The second category has a specific production and replacement condition; it should not be shortened to all residual-gas hydrogen. The numerator also excludes RFNBOs used as intermediates to produce conventional transport fuels and biofuels.
These boundaries matter when comparing national totals or estimating an addressable market. A total industrial-hydrogen figure may cover uses excluded from the legal calculation. Identify the source population and its energy basis before applying a percentage to it.
Hydrogen excluded from the Article 22a denominator
| Category | Boundary in the directive |
|---|---|
| Transport-fuel intermediates | Hydrogen used as an intermediate to produce conventional transport fuels and biofuels |
| Specified industrial residual gas | Hydrogen produced by decarbonising industrial residual gas and used to replace the specific gas from which it is produced |
| By-products | Hydrogen produced as a by-product or derived from by-products in industrial installations |
Sources
- [1] European Parliament and Council of the European Union: Directive (EU) 2023/2413 of 18 October 2023
As of: 31 Oct 2023
Last confirmed: 16 Nov 2026
A conditional reduction is not the default target
Article 22b permits a Member State to reduce the relevant RFNBO contribution by 20% in 2030 only if both conditions in that article are met. The state must be on track towards a national contribution to the EU renewable-energy target that is at least equivalent to its expected contribution under the Annex II formula in Regulation (EU) 2018/1999. The fossil-derived share of the hydrogen or hydrogen derivatives consumed in that state must be no more than 23% in 2030 and 20% in 2035.
The reduction ceases to apply if either condition is not fulfilled. A state applying it must notify the Commission with supporting information in the specified national plans and progress reports, and the Commission monitors continuing compliance.
Read this as a conditional reduction of the contribution, not a universal subtraction of 20 percentage points. Before using a reduced assumption, obtain evidence that the relevant conditions and notification apply. Do not assign the lower assumption to every country in a market-size calculation.
Sources
- [1] European Parliament and Council of the European Union: Directive (EU) 2023/2413 of 18 October 2023
As of: 31 Oct 2023
Last confirmed: 16 Nov 2026
Turn policy scope into questions for a buyer
A commercial assessment needs more than the headline share. Match the customer's hydrogen use to the relevant national measure, establish the qualifying product category and check the applicable dates. Keep any assumed conversion from a national energy total to a project sales volume visible.
Then ask for evidence of the purchase itself: product, quantity, price basis, delivery location, term and any disclosed conditions. A policy target and a purchase agreement answer different questions. Their relationship has to be demonstrated for the customer and supply arrangement being assessed.
This article addresses the industrial-target calculation in Articles 22a and 22b. Electricity sourcing and emissions accounting require their own checks. Do not use this calculation as a complete RFNBO-eligibility decision for a production facility.
Sources
- [1] European Parliament and Council of the European Union: Directive (EU) 2023/2413 of 18 October 2023
As of: 31 Oct 2023
Last confirmed: 16 Nov 2026
Related analyses
Explore related records
Research method
Research and writing were AI-assisted and reviewed before publication.