Analysis · 3 min read
EPA hydrogen reporting: Subpart P methods and the 2025 data deadline
The GHGRP deadline for 2025 data is 10 March 2027. Separate that date change from the hydrogen source-category rules, emissions methods and records behind a report.
Use the reporting-year-specific deadline
An EPA interim final rule published and effective on 14 October 2026 moved the deadline for Greenhouse Gas Reporting Program (GHGRP) data for reporting year 2025 from 30 October 2026 to 10 March 2027. The rule says this action changes only that annual-report deadline and makes no other changes to the reporting rule.
A reporting year identifies the emissions period; a submission date identifies when the report is due. Keep those fields separate. The 2025 data extension should not be applied to every later reporting year, and an extension alone does not establish that a facility has no reporting obligation.
The EPA programme page, updated on 3 November 2026, describes the broader GHGRP reconsideration as a proposal and links to the interim deadline extension. A proposed removal of obligations and an effective change to a deadline have different legal status. Check the applicable final action before changing a facility's reporting assumption.
Sources
- [1] United States Environmental Protection Agency; Federal Register: Extending the Reporting Deadline Under the Greenhouse Gas Reporting Rule for Reporting Year 2025 to March 10, 2027
As of: 14 Oct 2026
Last confirmed: 16 Nov 2026
- [3] United States Environmental Protection Agency: Greenhouse Gas Reporting Program
Last confirmed: 16 Nov 2026
Establish whether the facility falls within Subpart P
EPA's Subpart P information sheet covers units that produce hydrogen by transforming feedstock, including reforming, gasification, oxidation or reaction. It excludes units reported under another subpart and units that only separate hydrogen from a gas mixture without an associated feedstock-transformation unit.
Applicability also requires the reporting-threshold conditions. The information sheet directs readers to 40 CFR 98.161 and the GHGRP applicability tool. Section 98.161 in the e-CFR requires a hydrogen production process and the requirements of either 98.2(a)(1) or 98.2(a)(2). A generic statement that every hydrogen plant reports would omit that test.
For a project assessment, identify the process units, ownership and reporting boundary before reading an emissions total. A unit-level figure and a facility-level total can cover different equipment or gases. Match the data request to the boundary actually being assessed.
Sources
- [2] United States Environmental Protection Agency: Subpart P Information Sheet
Last confirmed: 16 Nov 2026
- [4] Office of the Federal Register and Government Publishing Office: 40 CFR 98.161: Reporting threshold
Last confirmed: 16 Nov 2026
The method determines the measurements to request
The EPA sheet describes continuous emissions monitoring systems (CEMS) under the specified Subpart C Tier 4 methodology, or a fuel and feedstock material balance, for process carbon dioxide emissions. The material-balance approach uses monthly fuel and feedstock consumption, carbon content and molecular weight.
The sheet also addresses separate stacks: where compliant CEMS measurements do not include combustion emissions from the hydrogen production unit, the fuel-input material balance is used to calculate those combustion emissions. A statement that a plant uses CEMS does not establish that every relevant stream is captured by that measurement.
Other reporting boundaries remain distinct. The sheet directs emissions from other stationary combustion units to Subpart C, and collected carbon dioxide transferred off site to Subpart PP. A process carbon dioxide number should therefore retain its method and coverage when it is used elsewhere.
Questions behind a reported hydrogen-production emissions figure
| Question | Evidence to request |
|---|---|
| Which units and gases are included? | Source-category assessment and applicable subparts |
| How is process carbon dioxide calculated? | CEMS coverage or the relevant fuel and feedstock measurements |
| Are any combustion stacks separate? | Stack boundaries and the additional calculation required |
| Which period does the report cover? | Reporting year, method and submission record |
Sources
- [2] United States Environmental Protection Agency: Subpart P Information Sheet
Last confirmed: 16 Nov 2026
Keep the supporting records and later changes visible
The information sheet says records pertaining to the annual GHGRP report must be retained for at least three years after submission. It points to the general provisions in 98.3(g) and the specific Subpart P requirements in 98.167. The filed summary is therefore only one part of the reporting evidence.
When comparing a supplier's emissions information with a product or incentive requirement, first reconcile the reporting boundary, gases, period and method. Do not assume that a facility report establishes a separate product-certification or tax-credit result. Those decisions need evidence for their own rules.
For the next review, obtain the applicability basis, the calculation method and its input records, and the latest official deadline or rule change. The EPA information sheet explains the framework, while the current regulation and subsequent effective actions govern the facility-specific assessment.
Sources
- [2] United States Environmental Protection Agency: Subpart P Information Sheet
Last confirmed: 16 Nov 2026
Related analyses
Explore related records
Research method
Research and writing were AI-assisted and reviewed before publication.